Aquaclean
Restore water quality. Reduce BOD and COD. Eliminate aquatic odour.
DO
Engineered for water bodies & aqua waste digester.
Lakes stagnate. Rivers carry industrial effluent. Sewage treatment plants struggle with organic load. Cooling towers accumulate biofilm and blue-green algae. Aquaclean was developed for exactly these environments — bringing the power of Hyper Catalase enzyme technology to the full spectrum of aquatic and water treatment challenges.
Six stages from application to ongoing biological protection.
Aquaclean Applied to Water System
Product is added to the water body, STP inlet, ETP treatment tank, or cooling tower basin by pour, pump, or automated dosing system.
Enzyme Activation
Superkino Enzymes activate on contact with the water environment. Enzymatic degradation of dissolved and suspended organic matter begins.
BOD & COD Reduction
Organic contaminants responsible for elevated BOD and COD are systematically broken down — reducing biological and chemical oxygen demand.
Algae Elimination & Biofilm Removal
For cooling towers: blue-green algae digested; biofilm accumulation on pipeline surfaces reduced. Improves heat exchange efficiency and reduces energy consumption.
Odour Neutralisation
Organic acids and sulphur compounds responsible for aquatic odour are oxidised and neutralised at source.
Water Quality Restoration
Dissolved oxygen levels improve as organic load reduces. Floc settling improves. Water clarity and biological stability increase.
What Aquaclean delivers.
Measurable outcomes across odour control, performance, cost reduction, and environmental safety.
Reduces BOD, COD, and total suspended solids in municipal and industrial wastewater
Improves dissolved oxygen levels — restoring ecosystem health in natural water bodies
Eliminates blue-green algae and digests biofilm in cooling tower systems
Increases heat exchange efficiency in cooling towers — reducing energy costs
Improves sanitation of potable and recreational water bodies
Enhances floc settling — improving efficiency of settlement-based treatment systems
Enables rapid recovery from STP/ETP biological upsets
Absorbs the shock of toxic influent — protecting treatment system biology
Environmentally friendly, biodegradable, non-corrosive to infrastructure
Available in customised formulation for specific industrial effluent profiles
Application areas.
Aquaclean is recommended for the following establishments and environments. For site-specific advice, our team will recommend dosage and frequency.
Explore all applicationsQuestions, answered.
Don't see your question? Our team replies within one working day.
Ask our specialists
How is Aquaclean applied to a large natural water body?
+
For lakes and ponds, Aquaclean can be applied directly by pour or by boat-mounted spray system. Water is not required to be removed and returned. For very large water bodies, a phased application programme is typically recommended.
Can Aquaclean be used in a functioning STP?
+
Yes. Aquaclean is designed for active integration into STP treatment processes. It can be added at the inlet or dosed directly into aeration tanks. It does not disrupt existing biological colonies — it enhances them.
How quickly will I see results in a cooling tower?
+
Initial results in algae reduction and biofilm removal are typically visible within 2–4 weeks of first application, depending on severity of existing build-up.
Is Aquaclean available in custom formulations?
+
Yes. For industrial clients with specific effluent profiles or regulatory discharge targets, Landmark Enviro-Care can develop a customised Aquaclean formulation.
Ready to put Aquaclean to work on your site?
Tell us your environment and waste profile. We'll recommend the right dosage, frequency, and combination with our other products.
